GB 50016-2014(2018年版)英文版 建筑设计防火规范

附件大小:87.38MB
附件格式:1个直链文件,格式为pdf
所属分类:工程规范
分享会员:
分享时间:
最后更新:
资源简介/截图:

2018年,GB 50016-2014,建筑设计防火规范,英文版,GB 50016-2014(2018年版)英文版 建筑设计防火规范

1.0.1 This code is formulated with a view to preventing fire accidents in buildings.reducing fire
hazards and protecting safety of life and property.
1.0.2 This code is applicable to the following newly constructed.enlarged and altered buildings:
1 Factory buildings;
2 Storages:
3 Civil buildings:
4 Class A.B.C liquid tanks(tank farms):
5 Combustible and combustion-supporting gas tanks(tank farms):
6 Stackyards for combustibles:
7 Urban road tunnels.
If dedicated national standards are available,the fire protection design of buildings for civil air
defense engineering,petroleum and natural gas engineering,petrochemical engineering,fossil fuel
power plants and substations should comply with the requirements of those standards.
1.0.3 This code is not applicable to the fire protection design of buildings such as factory buildings
(storages)for gunpowder,explosives and their products as well as fireworks and firecrackers.
1.0.4 Where a building is multi-used,fire separations shall be provided between different uses.Fire
protection design of buildings and the areas of different uses shall be determined according to the
relevant requirements of this code.
1.0.5 Fire protection design of buildings shall comply with the relevant national major policies.and
guarantee,on the whole,the overall planning,safety and applicability,advanced technology as well as
economical rationality according to the occupancies and fire hazards of the building.
1.0.6 In addition to comply with the requirements of this code,buildings with height greater than 250m
shall be protected with stricter fire protection measures according to the actual situation.Fire protection
design solutions of such buildings shall be discussed and reviewed by the national fire authorities.
1.0.7 In addition to the requirements of this code.fire protection design of buildings shall also comply
with those specified in the relevant current national standards.

2 Terms and symbols
2.1 Terms
2.1.1 high-rise building
Residential buildings with building height greater than 27m and non-single-storey factory
buildings,storages and other civil buildings with building height greater than 24m.
Note:The calculation of building height shall comply with those specified in Appendix A of this code.
2.1.2 podium
The ancillary part of a high-rise building,whose height is not greater than 24m,and is connected to
the main body of the high-rise building but is beyond the projection range of the main body.
2.1.3 important public building
The civil building other than residential building that may cause heavy casualties and property
losses,severe social impact in case of fire.
2.1.4 small commercial spaces
Commercial spaces such as shops.post offices,banks.barbershops located on the first floor or the
first and second floors of the residential buildings,with the building area of each separated unit not
greater than 300m.
2.1.5 high rack storage
Rack storage with rack height greater than 7m and with mechanical operation or automatic control.
2.1.6 semi-basement
A space having its average clear height greater than 1/3 but less than 1/2 below finished ground level.
2.1.7 basement
A space having more than half its average clear height below finished ground level.
2.1.8 open flame location
An indoor or outdoor location with open flame or red-hot subjects,excluding cooking utensils,
induction cooker and the like in a civil building.
2.1.9 sparking site
A location like chimney with flying fire,or for such operations as outdoor grinding wheel,electric
welding.gas welding and gas cutting.
2.1.10 fire-resistance rating
A period of time that starts from a building element,component or assembly that are exposed to
fire under standard fire conditions,to the time that they lose bearing capacity,integrity or insulation.
expressed in hours.

资源链接请先登录(扫码可直接登录、免注册)
十年老网站,真实资源!
高速直链,非网盘分享!浏览器直接下载、拒绝套路!
本站已在工信部及公安备案,真实可信!
手机扫码一键登录、无需填写资料及验证,支持QQ/微信/微博(建议QQ,支持手机快捷登录)
①升级会员方法:一键登录后->用户中心(右上角)->升级会员菜单
②注册登录、单独下载/升级会员、下载失败处理等任何问题,请加客服微信
不会操作?点此查看“会员注册登录方法”

投稿会员:芳华
我的头像

报歉!评论已关闭.

目前共 2 个评论

  1. 我的头像 Ricky说道:

    已付款,如何拿到?

    • 我的头像 兼职管理员说道:

      已登录状态 每个资料页面下方 会显示一个“点此立即下载”

手机扫码、免注册、直接登录

 注意:QQ登录支持手机端浏览器一键登录及扫码登录
微信仅支持手机扫码一键登录

账号密码登录(仅适用于原老用户)