施工技术 2016年12月上 58 CONSTRUCTION TECHNOLOGY 第45卷第23期 D01:10.7672/gjs2016230058 分段注浆止水技术在高水压盾构斜井施工中 的应用研究* 苏昂，曹勰2，李铮，何悦1 (1.西南交通大学交通隧道工程教育部重点实验室，四川成都610031； 2.神华新街能源有限责任公司新街项目部，内蒙古鄂尔多斯017212) [摘要]以新街台格庙矿区盾构施工煤矿斜井工程为依托，针对其高水压问题，在分析现有成果的基础上，提出分 段注浆止水、卸水降压措施.基于流-固耦合作用机理，通过使用FLACSD有限差分软件，对分段注浆止水效果进行 研究.研究结果证明：本工程条件下，分段注浆止水方式能够限制孔隙水压力<0.54MPa 主应力<4.40MPa 位移<0.980mm 满足隧道管片安全性要求，同时达到良好的止水效果，较好地解决了工程问题. [关键词]煤矿；斜井；盾构；高水压；分段注浆；流-固耦合 [中图分类号]TD262.1*2;TD421.5 [文献标识码]A [文章编号]1002-8498(2016)23-0058-04 Application of Waterproofing Technology with Section Grouting in Shield Construction with High Water Pressure for Inclined Shaft Su Ang' Cao Xie2 Li Zheng' He Yue' (1.Key Laboratory of Transportation Tunnel Engineering Ministry of Education Southicest Jiaotong University Chengdu Sichuan 610031 China:2.Xinjie Project Department of Shenhua Xinjie Energy Co.Ltd.Ordos Inner Mongolia 017212 China) Abstract:Based on a coal mine inclined shaft constructed by shield machine)in Taigemiao of Xinjie on the basis of relevant literature waterproofing with section grouting and water pressure reducing are put forward to deal with the unique high water pressure problems.Based on fluid-solid coupling mechanism the effect of waterproofing technology with section grouting is analyzed by finite difference software (FLAC3D).The results show that the waterproofing mode with section grouting can limit the pore water pressure lower than 0.54MPa the principal stress lower than 4.50MPa and displacement below 0.980m...
分段注浆止水技术在高水压盾构斜井施工中的应用研究.pdf
