AWSA5.1/A5.1M:2012 An American National Standard Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding American Welding Society Approved Amesican ANSI Copyright American Welding Soclety ded by IHS under with AWS No reproduction or networking permitted wthout icense from IHS Not for Resale AWSA5.1/A5.1M:2012 An American National Standard Approved by the American National Standards Institute April 10 2012 Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding 14th Edition Supersedes AWS A5.1/A5.1M:2004 Prepared by the American Welding Society (AWS)A5 Committee on Filler Metals and Allied Materials Under the Direction of the AWS Technical Activities Committee Approved by the AWS Board of Directors Abstract This specification establishes the requirements for classification of carbon steel electrodes for shielded metal arc weld- ing.The requirements include mechanical properties of weld metal weld metal soundness and usability of electrode. Requirements for position of the weld metal moisture content of low-hydrogen electrode coverings standard sizes and lengths marking manufacturing and packaging are also included.A guide to the use of the standard is included in an annex. Optional supplemental requirements include improved toughness and ductility lower moisture contents and diffusible hydrogen limits. This specification makes use of both U.S.Customary Units and the International System of Units(SI).Since these are not equivalent each system must be used independently of the other. American Welding Society 8669 Doral Blvd. Doral FL33166 Wudng Society ided by IHS under with AWS No reproduction or networking permitted without icense from IHS Not for Resale AWSA5.1/A5.1M:2012 : International Standard Book Number:978-0-87171-810-5 American Welding Society 8669 Doral Blvd..Doral.FL 33166 2012 by American Welding Society All rights reserved Printed in the United States of America Photocopy Rights.No portion of this standard may be repro...