BRITISH STANDARD BS EN 10025-1:2004 Hot rolled products of structural steels Part 1:General technical delivery conditions The European Standard EN 10025-1:2004 has the status of a British Standard IC877.140.10;77.140.50 BSi Copyright Brtoh Standanda NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW uood by IH undor loonso wifh BSI-Unoontroled Cepy British Standards No or networking permlted wthout from Nof for Resale BSEN10025-1:2004 National foreword This British Standard is the official English language version ofEN10025-1:2004.BSEN10025-1:2004 together with BS EN10025-2:2004 supersedes BS EN 10025:1993 which is withdrawn. BS EN 10025-1:2004 together with BS EN 10025-3:2004 and BS EN 10025-4:2004 supersedes BS EN 10113-1:1993 which is withdrawn. BS EN 10025-1:2004 together with BS EN 10025-3:2004 supersedes BS EN 10113-2:1993 which is withdrawn. BS EN 10025-1:2004 together with BS EN 10025-4:2004 supersedes BS EN 10113-3:1993 which is withdrawn. BS EN 10025-1:2004 together with BS EN 10025-6:2004 supersedes BS EN 10137-1:1996 which is withdrawn. BS EN 10025-1:2004 together with BS EN 10025-6:2004 supersedes BS EN 10137-2:1996 which is withdrawn. BS EN 10025-1:2004 together with BS EN 10025-5:2004 supersedes BS EN 10155:1993 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee ISE/12 Structural steels which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European mittee any enquiries on the interpretation or proposals for change and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this mittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled"International ...