BRITISH STANDARD BS EN 681-2:2000 Incorporating Amendments Nos.1 and 2 and Corrigendum No.1 Elastomeric seals Materials requirements for pipe joint seals used in water and drainage applications- Part 2:Thermoplastic elastomers The European Standard EN 681-2:2000.with the incorporation of amendments A1:2002 and A2:2005 has the status of a British Standard ICS23.040.80 BSi NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Copyright Brtoh Standanda uood by IHS undor loonso with BSI-Unoontroiled Copy British Standards No or networking permlted wthout from Nof for Resale BSEN681-2:2000 National foreword This British Standard is the official English language version of EN 681-2:2000 including amendments A1:2002 and A2:2005.Together with BS EN 682:2002 this publication supersedes BS 2494:1990 which is withdrawn. The start and finish of text introduced or altered by amendment is indicated in the text by tags Tags indicating changes to CEN text carry the number of the CEN amendment.For example text altered by CEN amendment Al is indicated by. The UK participation in its preparation was entrusted to Technical Committee PRI/70 Elastomeric seals which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European mittee any enquiries on the interpretation or proposals for change and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this mittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled"International Standards Correspondence Index" or by using the“Search'"facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract...