BRITISH STANDARD BS EN 682:2002 Incorporating Amendment No.1 Elastomeric seals Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids The European Standard EN 682:2002 with the incorporation of amendment A1:2005 has the status of a British Standard IC823.040;83.140.50 BSi NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW British Standards No or networking permited without from IHS Nof for Resale BSEN682:2002 National foreword This British Standard is the official English language version of EN 682:2002 including amendment A1:2005.Together with BS EN 681-2:2000 this publication supersedes BS 24942:1990 which is withdrawn. The start and finish of text introduced or altered by CEN amendment is indicated in the text by tags.Tags indicating changes to CEN text carry the number of the CEN amendment.For example text altered by CEN amendment Al is indicated by The UK participation in its preparation was entrusted to Technical Committee PRI/70 Elastomeric seals for joints in pipes which has the responsibility to: -aid enquirers to understand the text; present to the responsible international/European mittee any enquiries on the interpretation or proposals for change and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this mittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled“International Standards Correspondence Index" or by using the“Search'"facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract.Users are responsible for its correct application. Compliance with a British Standard does not ofitself conferimmunity from le...